|
|
Merbolin ellulosic glossy varnish |
|
|
|
|
|
|
|
|
|
Mode of Packing |
: |
0.750 l, 2.500 l and 15 l. |
|
|
|
|
Definition |
: |
It is a nitro cellulose based, air drying, glossy topcoat varnish. |
|
|
|
Color |
: |
Colourless, transparent |
|
|
|
Uses of... |
: |
It can be safely used on all kind of wooden surface. |
|
|
|
|
Specifications |
: |
It is quick drying glossy furniture varnish which resists to friction and knock and doesn’t crack and pour out. |
|
|
|
|
Technical Features |
: |
Type of Resin : Urethane alkyd resin Viscosity (KU)(25°C) : 80 ± 5 Specific Gravity (g/ml) (20°C) : 0.93 ± 0.03 Solid Content (by weight) (%) : 27 ± 1 Flash Point ( °C ) : < 21 Theoretical Coverage : 10 m ² / lt (30 µ dry film thickness ) Practical Coverage : 0,065 - 0,095 lt/m² ( one coat ) 0,060 0,090 kg/m² ( one coat ) Recommended number of coats : one or two coats. Drying Time (20°C) : Touch dry : 15 - 30 min. Dust free : 1.5 - 2 hours Thin Down Ratio : It is thinned with 20-25% Merbolin Cellulosic Thinner.
|
|
|
|
Application 1 |
: |
The application surface must be sound, dry and clean. . The wooden surfaces should be filled with Merbolin Cellulosic Sanding Sealer, after drying, the surface must be emerized and cleaned. |
|
|
|
Application 2 |
: |
The varnish must be mixed before the use. Depending on the application conditions, Merbolin Cellulosic Glossy Varnish is thinned with 20-25 % Merbolin Cellulosic Thinner. Merbolin Cellulosic Glossy Varnish should be applied as two or three cross coats, allowing 1-2 hours between the coats. |
|
|
|
Storage Conditions |
: |
It should be storaged in original and closed containers at 5-35°C temperatures for three years. It should be protected from extreme heat and moisture. |
|
|
|
Önemli Uyarılar |
: |
The varnish must be mixed before the use. The ambient temperature should be between 5 - 35 ° C at the time of application Application tools must be cleaned with Merbolin Synthetic Thinner, after the application,. After the application, the varnished surface must be protected during 3 days, from chemical and physical factors. The varnish doesn�t empty into drains. Application procedures defined above should be strictly observed.The varnish must be mixed before the use. The ambient temperature should be between 5 � 35 ° C at the time of application Application tools must be cleaned with Merbolin Synthetic Thinner, after the application,. After the application, the varnished surface must be protected during 3 days, from chemical and physical factors. The varnish doesn't empty into drains. Application procedures defined above should be strictly observed. |
|
|
|
Danger Warning |
: |
R 10 : Flammable. : R 20/21/22 : Harmful by inhalation, in contact with skin and if swallowed. :
|
|
|
|
Emergency Warning |
: |
S 2 : Keep out of the reach of children. : S 3 / 7 : Keep container tightly closed in a cool place. : S 24 / 25 : Avoid contact with skin and eyes. : S 29 : Do not empty into drains. : S 46 : If swallowed, seek medical advice immediately and show container or label. : S 16 : Keep away from sources of ignition, no smoking. : S 51 : Use only in well ventilated areas. :
|
|