Turkce English Arabic  
Main Page
  Main Page Corporate Products Dealers Contact  










Products of Merbolin
All About Paint
Price List
Product Categories
Water Based Topcoat Paints
Water Based Primers
Exterior Topcoat Paints and Coatings
Exterior Primers
Solvent Based Topcoat Paints
Solvent Based Primers
Wood Protectors and Varnishes
Furniture Group
Boyalin Group
Industrial Paints
Heavy Duty Paints
Merbolin epoxy topcoat paint
Merbolin epoxy primer paint
Merbolin solventfree epoxy floor coating
Merbolin solventfree epoxy topcoat paint
Merbolin solventfree proxy sealer
Merbolin epoxy surface toleration paint
Merbolin epoxy undercoat paint
Merbolin epoxy coal tar paint
Merbolin solventfree epoxy coal tar paint
Merbolin zink chromate epoxy primer paint
Merbolin zinc rich epoxy primer paint
Merbolin zinc phosphate epoxy primer paint
Merbolin epoxy sealer
Merbolin epoxy shop primer
Merbolin wash primer
Merbolin vinyl epoxy road paint
It is a epoxy resin based putty, which has two components.
Merbolin shop primer
Merbolin heat resistance aliminium paint (150 C)
Merbolin heat resistance primer paint (350 -400 C)
Merbolin heat resistance aliminium paint (600 C)
Merboclor topcoat paint
Merboclor tennis court paint
Merboclor flame retardant paint
Merboclor sealer
Merboclor primer paint
Merbolin epoxy thinner
Merboclor thinner
Merbolin wash primer thinner
Merbolin epoxy topcoat paint Word dosyas Pdf dosyas Yazdr

Mode of Packing

: I. Component : 15.0 kg / II. Component (Hardener): 5.0 kg.  


: It is a epoxy resin based topcoat paint, which has two components.


: Depending on request.

Uses of...

: It can be safely used on all metal surface for decorative and protection purposeful.


: Due to the epoxy resin properties, it has well water, chemical material, solvents and high abrasion resistance.  

Technical Features

: Type of Resin : Epoxy Resin / Polyamide Hardener
Specific Gravity (g/ml) (20C) : 1.35 0.05
Glossy : Gloss or semi gloss.
Solid Content (by weight) (%) : 68 2
Solid Content (by volume) (%) : 51 2
Flash Point ( C ) : 22
Heat Resistance (Dry) ( C ) : 140
Theoretical Coverage : 14 m/l; 10 m/kg ( 35 dry film thickness)
Practical Coverage : 5.5-11 m/kg ( 25-50 dry film thickness)
Mixing Ratio (by weight) : I. Component : 75 / II. Component (Hardener): 25
Pot Life (20C) : 8 12 hours.
Recommended wet film thickness : 70 110
Dry film thickness (one coat application) : 30 - 50
Drying Time (20C- Relative Humidity 65%) : First drying : 1 - 2 hour Drying : 5 - 6 hours Full hardening : 7 days
Thin Down Ratio : Depending on application method; it should be thinned with Merbolin Epoxy Thinner 5-10 % by weight.

Application 1

: All application surface must be clean, dry and free from oil. It is applied on primered surface.

Application 2

: Epoxy Paint and hardener components should be mixed well observe to mixing ratio. 5-10 minutes waited after components mixing, Merbolin Epoxy Topcoat Paint is applied on surface with brush, roller, air atomized or airless spray gun as one or two coats.

Storage Conditions

: It should be storaged in original and closed containers at 5 - 35 C temperatures for one year. It should be protected from extreme heat and moisture.

Önemli Uyarılar

: Two components must be mixed well.
The mixture should be prepared enough as small parts. The mixing ratio should be considered for paint wastage.
The ambient temperature should be between 5 35 C at the time of application
Application tools must be cleaned with Merbolin Epoxy Thinner, after the application,.
Paint doesnt empty into drains.
Application procedures defined above should be strictly observed.

Danger Warning

: R 10 : Flammable. :
R 20/21/22 : Harmful by inhalation, in contact with skin and if swallowed. :

Emergency Warning

: S 2 : Keep out of the reach of children. :
S 3 / 7 / 9 : Keep container tightly closed in a cool, well ventilated place. :
S 16 : Keep away from sources of ignition, no smoking. :
S 24 / 25 : Avoid contact with skin and eyes. :
S 29 : Do not empty into drains. :
S 46 : If swallowed, seek medical advice immediately and show container or label. :
S 51 : Use only in well ventilated areas. :