Turkce English Arabic  
Main Page
  Main Page Corporate Products Dealers Contact  
 
 

 

 

 

 

 

 

 

 

 

 
Products of Merbolin
All About Paint
Price List
Product Categories
Water Based Topcoat Paints
Water Based Primers
Exterior Topcoat Paints and Coatings
Exterior Primers
Solvent Based Topcoat Paints
Solvent Based Primers
Merbolin synthetic prime
Merbolin advantage synthetic primer
Merbolin antirust
Merbolin advantage antirust
Merbolin super synthetic putty
Merbolin synthetic thinner
Wood Protectors and Varnishes
Furniture Group
Boyalin Group
Industrial Paints
Glues
Heavy Duty Paints
 
Merbolin synthetic prime Word dosyası Pdf dosyası Yazdır
 
 

Mode of Packing

: 0,750 lt , 2.500 lt, 7.500 lt ve 15 lt.  

Definition

: It is an alkyd resin based, matt primer paint.

Color

: Beyaz

Uses of...

: It can be used reliable on surface of, wooden, metal and plastered
 

Specifications

: It fills the surface, and forms smooth and sound surface. It has high opacity, applied easily, smooth and matt appearance, synthetic paint primer.  

Technical Features

: Type of Resin : Alkyd resin
Viscosity (KU)(25°C) : 105 - 110
Specific Gravity (g/ml) (20°C) : 1.66 ± 0.020
Solid Content (by weight) (%) : 81 ± 2
Glossy (60° - Gloss) : matt
Flash Point ( °C ) : 38
Theoretical Coverage : 21 m ² / lt ( 30 µ dry film thickness)
Practical Coverage : 0,070 - 0,090 lt/m² ( one coat ) 0,120 0,150 kg/m² ( one coat )
Recommended number of coats : one or Two coats.
Drying Time (20°C) : Dust free : 3 - 5 hours Dry through : 8 - 10 hours.
Thin Down Ratio : 10 - 15 % (with Merbolin Synthetic Thinner.)

Application 1

: All application surface must be sound,dry and clean.

Wooden Surface; All knots are burned and saturated with Merbolin Merbotex Wood Protector . Metal Surfaces; Rusty and blistered paint is cleaned, surface free from dirt, and oil. Merbolin Antirust should be applied as one coat. Merbolin Synthetic Putty is applied and emerized for levelled surface. Plastered Surface; Old an blistered paint is cleaned and local puttying is applied on fault of surface and emerized.

Application 2

: After surface preparation, Merbolin Synthetic Primer is thinned with 10 - 15 % Merbolin Synthetic Thinner and applied with brush or roller as one or two coats. If it is necessary second coat application, the first coat should be emerized and waited 3-5 hours between the coats.

Storage Conditions

: It should be storaged in original and closed containers at 5 - 35 ° C temperatures for three years. It should be protected from extreme heat and moisture.

Önemli Uyarılar

: The primer must be mixed before the use.
The ambient temperature should be between 5 � 35 ° C at the time of application
Application tools must be cleaned with Merbolin Synthetic Thinner, after the application,.
After the application, the primered surface must be protected during
12 hours, from chemical and physical factors.
The primer doesn�t empty into drains.
Application procedures defined above should be strictly observed.

Danger Warning

: R 10 : Flammable. :
R 20/21/22 : Harmful by inhalation, in contact with skin and if swallowed. :

Emergency Warning

: S 2 : Keep out of the reach of children. :
S 3 / 7 : Keep container tightly closed in a cool place. :
S 24 / 25 : Avoid contact with skin and eyes. :
S 29 : Do not empty into drains. :
S 46 : If swallowed, seek medical advice immediately and show container or label. :
S 16 : Keep away from sources of ignition, no smoking. :
S 51 : Use only in well ventilated areas. :