Turkce English Arabic  
Main Page
  Main Page Corporate Products Dealers Contact  










Products of Merbolin
All About Paint
Price List
Product Categories
Water Based Topcoat Paints
Water Based Primers
Merzboizlan insulation primer
Merbolin interior transparent primer
Merbolin gypsum primer
Merbolin coverter primer
Merboclor colorant
Merbolin interior putty
Merbolin waterproofing coating
Exterior Topcoat Paints and Coatings
Exterior Primers
Solvent Based Topcoat Paints
Solvent Based Primers
Wood Protectors and Varnishes
Furniture Group
Boyalin Group
Industrial Paints
Heavy Duty Paints
Merzboizlan insulation primer Word dosyası Pdf dosyası Yazdır

Mode of Packing

: 0.750 l, 2.5 l, 7.5 l and 15 l.  


: It is vinyl acrylic copolymer resin based, silicone modified, transparent, insulation material and paint primer.


: Light violet

Uses of...

: It can be safely used before water based paint application on surface of plaster, gypsum and concrete as a primer coat. It can be safely used as insulation material on wall, roof, terrace and bathroom for water proofing.


: It is water based, odourless, environment friendly insulation material and paint primer, which is performed bridge function for topcoat adhesion to surface. Furthermore, due to its reduce absorptivity of the surface, the paint consumption is decrease.  

Technical Features

: Type of Resin : Vinil acrylic copolymer
Viscosity (KU)(25°C) : 75 ± 5
Specific Gravity (g/ml) (20°C) : 1.00 ± 0.03
Solid Content (by weight) (%) : 37 ± 2
pH : 6.50 – 7.50
Theoretical Coverage : 30 m² /lt (when thinned with 2 l of water)
Practical Coverage : 25 – 30 m²/kg (when thinned with 2 l of water)
Recommended number of coats : For paint primer : One coat For insulation material : 3 – 4 coats.
Drying Time (20°C) : For paint primer : 2 - 3 hours For insulation material : 6 - 8 hours
Thin Down Ratio : For paint primer : 1 part Merboizolan / 5 – 7 parts water For insulation material:1 part Merboizolan / 2 parts water

Application 1

: All application surfaces must be sound, dry and clean
Old painted, blistered and dirty surface must be cleaned by scratching and puttied with Merbolin Interior Putty or Merbolin Exterior Putty to take sound and smooth surface. The surface of puttied or plastered is sandpapered and free from dust.

Application 2

: a ) Using for insulation material : 1 part Merboizolan Insulation Primer is thinned with 2 parts water and applied as first coat. After drying;

1 part Merboizolan Insulation Primer is thinned with 1 parts water for second coat application. Allowing to drying, Merboizolan Insulation Primer can be applied 3,4 or 5 coats on surface, which has large crack

b ) Using for paint primer : 1 part Merboizolan Insulation Primer is thinned with 5 – 7 parts water and this mixture should be applied with brush or roller as one coat.

c ) Using for plaster primer : 1 part Merboizolan Insulation Primer is thinned with 7 parts water and this mixture should be applied same proportional on surface with brush or roller as one coat.

Storage Conditions

: It should be storaged in original and closed containers at 5 - 35 ° C temperatures for two years. It should be protected from extreme heat, moisture and frost.

Önemli Uyarılar

: Primer must be mixed before the use.
The ambient temperature should be between 5–35°C at the time of application
Application tools must be cleaned with water, after the application,.
If the primer doesn’ t thin for using aim, topcoat paint film layer can be rough.
Primer doesn’t empty into drains.
Application procedures defined above should be strictly observed.

Danger Warning

: R 22 : Harmful if swallowed. :

Emergency Warning

: S 2 : Keep out of the reach of children. :
S 3 / 7 : Keep container tightly closed in a cool place. :
S 24 / 25 : Avoid contact with skin and eyes. :
S 29 : Do not empty into drains. :
S 46 : If swallowed, seek medical advice immediately and show container or label. :