Froma Synthetic Paint

Mode of Packing 0.750 lt, 2.5 lt and 15 lt
Definition It is synthetic alkyd resin based, glossy top coat paint.
Color According to colour card.
Uses of... It can be used reliable on surfaces of on interior and exterior surfaces of all wooden or iron structural materials such as doors, windows, balustrades etc. and on surfaces of seacraft and agricultural equipment.
Specifications Merbolin Froma Synthetic Paint has high hiding power. It is glossy, fadeless decorative topcoat paint and protects the surface against the exterior effects.
Technical Features

Type of Resin : Alkyd resin
Viscosity (KU)(25 °C) : 105 ± 5
Specific Gravity (g/ml) (20 °C) : 1.30 ± 0.05
Solid Content (by weight) (%) : 76 ± 2
Glossy (60° - Gloss) : Min. 80
Flash Point ( °C ) : 38
Theoretical Coverage : 18 m²/lt ( 30 µ dry film thickness)
Practical Coverage : 0,070 - 0,090 lt/m² ( one coat ),                          0,090 - 0,120 kg/m² (one coat)
Recommended number of coats : Two coats.
Drying Time (20 °C) : Touch dry : 4 - 5 hours, Dust free: 7 - 8 hours Dry through : 24 hours.
Thin Down Ratio : 10 - 15% (with Merbolin Synthetic Thinner.)

Application 1 All application surface must be sound, clean and dry. a) Old Wooden Surfaces: Old and blistered paint must be clean and surface is sandpapered. After that, the surface is coated with Merbolin Merbotex or Merbolin Synthetic Primer. b) New Wooden Surfaces: All knots are burned, the surface is coated with Merbolin Merbotex or Merbolin Synthetic Primer c) Old Metal Surfaces: Old and blistered paints are scraped, sanded and primed with Merbolin Antirust. d) New Metal Surfaces: Surface must be clean free from dirt, oil and primed with Merbolin Antirust.
Application 2 12 hours after the application of primer coat, Merbolin Froma Synthetic Paint is thinned with 10 - 15% Merbolin Synthetic Thinner. It should be applied with brush, roller or paint gun as two coat, allowing 8 - 10 hours between the coats.
Storage Conditions It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat and moisture.
Important Notices

Paint must be mixed before the use.
The ambient temperature should be between 5 - 35 °C at the time of application
Application tools must be cleaned with Merbolin Synthetic Thinner, after the application,.
After the application, the painted surface must be protected during
3 days, from chemical and physical factors.
Paint doesn't empty into drains.
Application procedures defined above should be strictly observed.


DANGER WARNINGS

H226 Flammable liquid and vapour.
H336 May cause dizziness or lightheadedness.
H411   Long-lasting toxic effect in aquatic environments. 
EMERGENCY WARNINGS

P101 Keep the package and the label if you need medical advice.
P102  Keep out of reach of children
P103  Read the label before using. 
P210 Keep away from heat/sparks/flames/hot surfaces. – Smoking is forbidden.
P241 Use explosion proof electrical/ventilating/ignition materials.
P261 Avoid breathing dust, vapor, mist, gas, smoke, spray.
P303+P361+P353 IN CASE OF SKIN (or hair) CONTACT: Instantly remove/take off all contaminated clothing. Rinse your skin with water/shower.
P405 Keep under lock and key.
P501 Dispose of the content/container in accordance with local/regional/national/international legislations.