Lux Merbotex Semi Gloss Wood Varnish

Mode of Packing 0,750 lt , 2.5 lt and 15 lt.
Definition It is a synthetic alkyd resin based, transparent, semi gloss and decorative wood varnish.
Color According to colour card.
Uses of... It can be used reliable on all wood surface and garden forniture.
Specifications It is fadeless, resists to scratch and abrasion. Due to it is semi gloss, it gives to surface silky appearance and doesn't prevent to breath of wood.
Technical Features

Type of Resin : Alkyd resin
Viscosity (sec-DIN 4)(25 °C) : 42 ± 5
Specific Gravity (g/ml) (20 °C) : 0.90 ± 0.03
Solid Content (by weight) (%) : 46 ± 2
Glossy (60° - Gloss) : Semi gloss
Flash Point ( °C ) : 38
Theoretical Coverage : 12 m²/lt
Practical Coverage : 0,080 - 0,100 lt/m² (one coat) ,                              0,070 - 0,090 kg/m² (one coat)
Recommended number of coats : Two coats.
Drying Time (20 °C) : Touch dry : 1 - 3 hours ,                                    Second coat application : 7 - 8 hours ,                                                Dry through : 12 - 15 hours.
Thin Down Ratio : It is used directly, not need thinn

Application 1 All application surfaces must be clean, dry and free from dirt and oil. The surface should be sandpapered if it is necessary. All knots are burned and cleaned with Merbolin Cellulosic Thinner
Application 2 It is ready to use and not need thinner. After well mixing, Lux Merbotex Semi Gloss Wood Varnish should be applied with brush, roller or spray gun as two coat, allowing 6 - 8 hours between the coats.
Storage Conditions It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat and moisture.
Important Notices

Lux Merbotex Semi Gloss Wood Varnish must be mixed before the use.
The ambient temperature should be between 5 - 35 °C at the time of application
Application tools must be cleaned with Merbolin Synthetic Thinner, after the application,.
After the application, the surface must be protected during 3 days, from chemical and physical factors.
Lux Merbotex Semi Gloss Wood Varnish doesn't empty into drains.
Application procedures defined above should be strictly observed.


DANGER WARNINGS

H226 Flammable liquid and vapour.
H336 May cause dizziness or lightheadedness.
H411 Long-lasting toxic effect in aquatic environments. 
EMERGENCY WARNINGS

P101 Keep the package and the label if you need medical advice.
P102  Keep out of reach of children
P103  Read the label before using. 
P210 Keep away from heat/sparks/flames/hot surfaces. – Smoking is forbidden.
P241 Use explosion proof electrical/ventilating/ignition materials.
P261 Avoid breathing dust, vapor, mist, gas, smoke, spray.
P303+P361+P353 IN CASE OF SKIN (or hair) CONTACT: Instantly remove/take off all contaminated clothing. Rinse your skin with water/shower.
P405 Keep under lock and key.
P501 Dispose of the content/container in accordance with local/regional/national/international legislations.