| Mode of Packing |
18 kg. |
| Definition |
It is a chlorinated rubber resin based, anticorrosive primer. |
| Color |
White, Grey, Red and Yellow. |
| Uses of... |
It can be safely used on metal surface for protect against corrosion. |
| Specifications |
Due to having anticorrrosive pigment and chlorinated rubber resin, it protects the metal surface under high corrosive condition. It is one component and use easily |
| Technical Features |
Type of Resin : Chlorinated rubber resin / Plasticizer
Specific Gravity (g/ml) (20 °C) : 1.50 ± 0.05
Glossy : Matt.
Solid Content (by weight) (%) : 67 ± 1
Solid Content (by volume) (%) : 40 ± 1
Flash Point ( °C ) : 22
Heat Resistance (Dry) ( °C ) : 70
Theoretical Coverage : 16 m²/l; 10 m²/kg (25 µ dry film thickness)
Practical Coverage : 4 - 7 m²/kg (25-50 µ dry film thickness)
Drying Time(20 °C- Relative Humidity 65%):Touch drying:30-60 min. Drying : 8 - 10 hours, Full hardening : 7 days.
Thin Down Ratio : It should be thinned with Merboclor Paint Thinner 5 - 10% by weight.
|
| Application 1 |
The surface should be cleaned by sand blasting minumum Sa 2, preferably Sa 2½. All application surface must be clean, dry and free from rust and old paint layers. |
| Application 2 |
Merboclor Primer Paint should be thinned with Merboclor Paint Thinner 5 - 10% by weight and applied with brush, roller or airless spray gun as two coats, allowing 24 hours between the coats. |
| Storage Conditions |
It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat and moisture. |
| Important Notices |
Primer paint must be mixed well before the use.
The ambient temperature should be between 5 - 35 ° C at the time of application
Application tools must be cleaned with Merboclor Paint Thinner, after the application,.
After the application, the painted surface must be protected during 24 hours, from chemical and physical factors.
The primer paint doesn't empty into drains.
Application procedures defined above should be strictly observed
|
