| Mode of Packing |
16 kg |
| Definition |
It is a vinyl resin based one component anticorrosive primer. |
| Color |
Red |
| Uses of... |
It can be safely used on metal surface for protect against corrosion. |
| Specifications |
It is a primer paint that is resistant to chemical factors, has high abrasion resistance and hardens in a short time. |
| Technical Features |
Type of Resin : Vinyl Resin
Specific Gravity (g/ml) (20 °C) : 1.20 ± 0.05
Glossy : Matt.
Solid Content (by weight) (%) : 56 ± 2
Solid Content (by volume) (%) : 30 ± 2
Heat Resistance (Dry) ( °C ) : 80 Flash Point (°C) : 10
Theoretical Coverage : 14 m²/lt; 10.5 m²/kg (20 µ dry film thickness)
Practical Coverage : 5.5 - 7.5 m²/kg (20 - 30 µ dry film thickness) Recommended wet film thickness : 70 - 125 µ
Dry film thickness (one coat application) : 20 - 35 µ
Drying Time(20 °C- Relative Humidity 85%): First drying:10 - 15 min. Drying : 1 - 2 hours, Second coat application: 3 hours, Full hardening: 3 days
Thin Down Ratio : It can be thinned by 10-15% by weight with Merbolin Shop Primer Paint Thinner. (Depending on the surface condition and the type of application)
|
| Application 1 |
The surface should be cleaned by sand blasting Sa 2 or Sa 2½. All application surface must be sound, clean and dry. |
| Application 2 |
Merbolin Epoxy Shop Primer and hardener component should be mixed well observe to mixing ratio. 5-10 minutes waited after components mixing, Merbolin Epoxy Shop Primer is applied on surface with paint gun as one or two coats, allowing 20 to 30 minutes between the coats. |
| Storage Conditions |
It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat and moisture. |
| Important Notices |
Two components must be mixed well.
The mixture should be prepared enough as small parts. The mixing ratio should be considered for paint wastage.
The ambient temperature should be between 5 - 35 °C at the time of application.
Application tools must be cleaned with Merbolin Shop Primer Thinner, after the application.
Primer doesn't empty into drains.
Application procedures defined above should be strictly observed.
|
