| Mode of Packing |
18 kg |
| Definition |
It is a chlorine rubber resin-based, one-component paint resistant to various atmospheric conditions. |
| Color |
Red, green and white |
| Uses of... |
It is used for marking or painting asphalt and concrete floors of sports fields such as tennis courts. |
| Specifications |
It is a paint that has the properties of chlorine rubber resins, resistant to water and chemical factors, and can be easily applied to asphalt and concrete floors. |
| Technical Features |
Type of Resin : Chlorinated rubber resin / Plasticizer
Specific Gravity (g/ml) (20 °C) : 1.30 ± 0.05
Glossy : Gloss or semi gloss.
Solid Content (by weight) (%) : 55 - 60
Solid Content (by volume) (%) : 36 ± 2
Flash Point ( °C ) : 22
Heat Resistance (Dry) ( °C ) : 70
Theoretical Coverage : 7 m²/lt; 5,5 m²/kg (50 µ dry film thickness)
Practical Coverage : 4.5 - 5 m²/kg (50 µ dry film thickness) Recommended number of coats : Two coats.
Drying Time (20 °C- Relative Humidity 85%): First drying: 1 - 2 hours, Drying : 8 - 10 hours, Full hardening : 7 days
Thin Down Ratio : Depending on application method; it should be thinned with Merboclor Paint Thinner 5 - 10% by weight.
|
| Application 1 |
Surfaces on which court paint will be applied; must be solid, clean and dry. To the surface prepared for paint application; Merboclor Sealer can be used as a thin layer of 0.250-0.300 kg/m² or as a primer by thinning Merboclor Tennis Court Paint by 30 - 40% with Merboclor Paint Thinner. |
| Application 2 |
4 - 5 hours after the primer application; After Merboclor Tennis Court Paint is diluted and mixed with 10 - 15% Merboclor Paint Thinner according to the application method; It is applied in two layers with a brush or roller, waiting for 24 hours between the layers. |
| Storage Conditions |
It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat and moisture. |
| Important Notices |
Paint must be mixed well before the use.
The ambient temperature should be between 5 - 35 °C at the time of application.
Application tools must be cleaned with Merboclor Paint Thinner, after the application,.
After the application, the painted surface must be protected during 24 hours, from chemical and physical factors.
The paint doesn't empty into drains.
Application procedures defined above should be strictly observed.
|
