| Mode of Packing |
18 kg |
| Definition |
It is a chlorinated rubber resin based, one component topcoat paint. |
| Color |
Depending on request. |
| Uses of... |
It can be safely used on concrete, plastered or metal surface for protect against corrosion. |
| Specifications |
Due to having chlorinated rubber resin properties, it protects the surface against water, salt, acid and alkaline chemicals. It gives decorative appearance when it choosed suitable colours with ambiance. |
| Technical Features |
Type of Resin : Chlorinated rubber resin / Plasticizer
Specific Gravity (g/ml) (20 °C) : 1.30 ± 0.05
Glossy : Gloss or semi gloss.
Solid Content (by weight) (%) : 55 - 62
Solid Content (by volume) (%) : 37 ± 2
Flash Point ( °C ) : 22
Heat Resistance (Dry) ( °C ) : 70
Theoretical Coverage : 15 m²/lt; 11 m²/kg (25 µ dry film thickness)
Practical Coverage : 4.5 - 8 m²/kg (25 - 50 µ dry film thickness) Recommended number of coats : Two coats.
Drying Time (20 °C- Relative Humidity 85%): First drying: 1 - 2 hours, Drying : 8 - 10 hours, Full hardening : 7 days
Thin Down Ratio : Depending on application method; it should be thinned with Merboclor Paint Thinner 5 - 10% by weight.
|
| Application 1 |
The surface should be cleaned by sand blasting minumum Sa 2, preferably Sa 2½. All application surface must be clean, dry and free from rust and old paint layers. Application surface should be primed with Merboclor Primer Paint as one coat. |
| Application 2 |
Depending on the application method, Merboclor Topcoat Paint should be thinned with Merboclor Paint Thinner 5 - 10% by weight and applied with brush, roller or airless spray gun as two coats, allowing 24 hours between the coats |
| Storage Conditions |
It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat and moisture. |
| Important Notices |
Paint must be mixed well before the use.
The ambient temperature should be between 5 - 35 °C at the time of application.
Application tools must be cleaned with Merboclor Paint Thinner, after the application,.
After the application, the painted surface must be protected during 24 hours, from chemical and physical factors.
The paint doesn't empty into drains.
Application procedures defined above should be strictly observed.
|
