| Mode of Packing |
20 kg. |
| Definition |
It is an acrylic resin based, elastic, silk matt exterior coating. |
| Color |
According to colour card. |
| Uses of... |
It can be safely used on exterior surface of plaster, concrete mineral substrate for decorative and protective purposeful. |
| Specifications |
Especially it's resistant to seaside negative weather conditions and ultraviolet rays. During the aplication, it can also covered the plaster faults. It doesn't contain solvent, odourless, elastik exterior coating, which gives to surface silk mat appearence. |
| Technical Features |
Type of Resin : Acrylic copolymer
Viscosity (KU)(25 °C) : 130 - 140 (when thinned 10% with water)
Specific Gravity (g/ml) (20 °C) : 1.34 ± 0.05
Solid Content (by weight) (%) : 64 ± 2
Glossy ( 85° - Gloss ) : Silk matt
pH : 8.00 - 9.00
Theoretical Coverage : 1.5 m²/lt
Practical Coverage : 0.800 - 1.200 kg/m²
Recommended number of coats : one coat.
Drying Time (20 °C) : Drying : 3 - 4 hours, Full drying : 24 hours
Thin Down Ratio : It is used without dilution, not need thinner
|
| Application 1 |
All application surface must be sound, dry and clean Old painted, blistered and dirty surface must be cleaned by scratching and puttied Merbolin Exterior Putty to take sound and smooth surface. After putty application, the surface should be primered with Merbolin Silicone Modified Exterior Primer or Merboizolan Insulation Primer as one coat. |
| Application 2 |
2 - 4 hours after primer application, Merbolin Elastic Exterior Coating is applied without dilution with roller as one coats. |
| Storage Conditions |
It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat, moisture and frost. |
| Important Notices |
Paint must be mixed before the use.
The ambient temperature should be between 5 - 35 °C at the time of application
Application tools must be cleaned with water, after the application,.
After the application, the painted surface must be protected during
3 days, from chemical and physical factors.
Paint doesn t empty into drains.
Application procedures defined above should be strictly observed.
|
