| Mode of Packing |
0.750 lt, 2.5 lt, 7.5 lt and 20 kg. |
| Definition |
It is an acrylic copolymer resin based, matt, interior paint |
| Color |
According to colour card. |
| Uses of... |
It can be safely used on interior surface of gypsum, plaster, concrete for decorative and protection purposeful. |
| Specifications |
It is water based, odourless, coloured, matt, decorative, interior wall paint, which has high opacity and vapor permeability. |
| Technical Features |
Type of Resin : Acrylic copolymer
Viscosity (KU)(25 °C) : 134 ± 3
Specific Gravity (g/ml) (20 °C) : 1.62 ± 0.03
Solid Content (by weight) (%) : 69 ± 2
Glossy ( 85° - Gloss ) : 7 ± 3
pH : 8.00 - 9.00
Theoretical Coverage : 15 m² /lt ; 9 m²/kg (30 µ dry film thickness)
Practical Coverage : 0,075 - 0,090 lt/m² ( one coat ) 0,125 - 0,150 kg/m² (one coat)
Recommended number of coats : Two coats
Drying Time (20 °C) : Drying : 2 - 3 hours, Full drying : 24 hours
Thin Down Ratio : 30% ( with water )
|
| Application 1 |
All application surfaces must be sound, dry and clean Old painted, blistered and dirty surface must be cleaned by scratching and puttied with Merbolin Interior Putty to take sound and smooth surface. After putty application, the surface should be primed with Merboizolan Insulation Primer as one coat. |
| Application 2 |
2 - 3 hours after primer application, Merbolin Avantaj Silicone Modified Interior Paint, which is applied with brush or roller, is thinned with 30% water. It should be applied as two coats, allowing 2 - 3 hours between the coats. |
| Storage Conditions |
It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat, moisture and frost. |
| Important Notices |
Paint must be mixed before the use.
The ambient temperature should be between 5 - 35 °C at the time of application.
Application tools must be cleaned with water, after the application,.
After the application, the painted surface must be protected during
3 days, from chemical and physical factors.
Paint doesn't empty into drains.
Application procedures defined above should be strictly observed.
|
