| Mode of Packing |
0.850 kg, 3 kg and 12 kg. |
| Definition |
It is a nitro cellulose and alkyd resin based, air drying, primer. |
| Color |
White and grey. |
| Uses of... |
It can be safely used on wooden and metal surface like furniture, automotive industry. |
| Specifications |
It is, easily sandpaper and quick drying primer which has high filling capacity and well adhesion to surface. |
| Technical Features |
Type of Resin : Urethane alkyd resin
Viscosity (KU)(25 °C) : 85 - 90
Specific Gravity (g/ml) (20 °C) : 1.32 ± 0.02
Solid Content (by weight) (%) : 58 ± 1
Glossy (60° - Gloss) : Matt.
Flash Point ( °C ) : < 21
Theoretical Coverage : 17 m²/lt (30 µ dry film thickness)
Practical Coverage : 0,070 - 0,080 lt/m² (one coat), 0,095 - 0,105 kg/m² (one coat)
Recommended number of coats : two or three coats.
Drying Time (20 °C) :Touch dry : 5 - 10 min. , Dust free: 2 - 3 hours
Thin Down Ratio : It is thinned with 25 - 30% Merbolin Cellulosic Thinner.
|
| Application 1 |
Application surface must be clean and free from rust and dust. Old and blistered paint coats should be cleaned and levelled with putty as regional area. |
| Application 2 |
Merbolin Cellulosic Primer is thinned with 25 - 30% Merbolin Cellulosic Thinner. It should be applied with paint gun as two or three coats, allowing 10 - 15 minutes between the coats. |
| Storage Conditions |
It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat and moisture. |
| Important Notices |
The primer must be mixed before the use.
The ambient temperature should be between 5 - 35 °C at the time of application
Application tools must be cleaned with Merbolin Cellulosic Thinner, after the application,.
After the application, the primered surface must be protected during 12 hours, from chemical and physical factors.
The primer doesn’t empty into drains.
Application procedures defined above should be strictly observed.
|
