| Mode of Packing |
0.750 l, 2.500 l and 15 l. |
| Definition |
It is a nitro cellulose based sanding sealer which is quick drying easy to sand. |
| Color |
Colourless, transparent. |
| Uses of... |
It can be safely used on all kind of wooden surface for filling to pore and obtaining the smooth surface. |
| Specifications |
It is quick drying easy to sand and doesn’t change the surface nature. Due to filling the surface, the surface doesn’t absorb the topcoat varnish and to save the time and topcoat material. |
| Technical Features |
Type of Resin : Urethane alkyd resin
Viscosity (KU)(25°C) : 80 ± 5
Specific Gravity (g/ml) (20°C) : 0.93 ± 0.03
Solid Content (by weight) (%) : 27 ± 1
Flash Point ( °C ) : < 21
Theoretical Coverage : 10 m ² / lt (30 µ dry film thickness )
Practical Coverage : 0,065 - 0,095 lt/m² ( one coat ) 0,060 0,090 kg/m² ( one coat )
Recommended number of coats : one or two coats.
Drying Time (20°C) : Touch dry : 15 - 30 min. Dust free : 1.5 - 2 hours
Thin Down Ratio : It is thinned with 20-25% Merbolin Cellulosic Thinner.
|
| Application 1 |
The application surface must be sound, dry and clean. . The wooden surfaces should be filled with Merbolin Cellulosic Sanding Sealer, after drying, the surface must be emerized and cleaned |
| Application 2 |
The varnish must be mixed before the use. Depending on the application conditions, Merbolin Cellulosic Glossy Varnish is thinned with 20-25 % Merbolin Cellulosic Thinner. Merbolin Cellulosic Glossy Varnish should be applied as two or three cross coats, allowing 1-2 hours between the coats. |
| Storage Conditions |
It should be storaged in original and closed containers at 5-35°C temperatures for three years. It should be protected from extreme heat and moisture. |
| Important Notices |
The varnish must be mixed before the use.
The ambient temperature should be between 5 - 35 ° C at the time of application
Application tools must be cleaned with Merbolin Synthetic Thinner, after the application,.
After the application, the varnished surface must be protected during 3 days, from chemical and physical factors.
The varnish doesn't empty into drains.
Application procedures defined above should be strictly observed.The varnish must be mixed before the use.
The ambient temperature should be between 5-35 ° C at the time of application
Application tools must be cleaned with Merbolin Synthetic Thinner, after the application,.
After the application, the varnished surface must be protected during 3 days, from chemical and physical factors.
The varnish doesn't empty into drains.
Application procedures defined above should be strictly observed.
|
