| Mode of Packing |
(I. Comp.:15 kg / II.Comp.:5 kg)-(I.Comp.:3.750 kg / II.Comp.:1.250 kg) |
| Definition |
It is a epoxy resin based topcoat paint, which has two components. |
| Color |
Depending on request. |
| Uses of... |
It can be safely used on all metal surface for decorative and protection purposeful. |
| Specifications |
Due to the epoxy resin properties, it has well water, chemical material, solvents and high abrasion resistance. |
| Technical Features |
Type of Resin : Epoxy Resin / Polyamide Hardener
Specific Gravity (g/ml) (20 °C) : 1.35 ± 0.05
Glossy : Gloss or semi matt.
Solid Content (by weight) (%) : 68 ± 2
Solid Content (by volume) (%) : 51 ± 2
Flash Point ( °C ) : 22
Heat Resistance (Dry) (°C ) : 140
Theoretical Coverage : 14 m²/lt ; 10 m²/kg (35 µ dry film thickness)
Practical Coverage : 5.5-11 m²/kg (25 - 50 µ dry film thickness)
Mixing Ratio(by weight):I.Component:75/II.Component(Hardener):25
Pot Life (20 °C) : 8 - 12 hours.
Recommended wet film thickness : 70 - 110 µ
Dry film thickness (one coat application) : 30 - 50 µ
Drying Time (20 °C- Relative Humidity 85%) : First drying: 1 - 2 hours, Drying : 5 - 6 hours, Second coat application : 24 hours, Full hardening : 7 days
Thin Down Ratio : Depending on application method; it should be thinned with Merbolin Epoxy Thinner 5 - 10% by weight.
|
| Application 1 |
All application surface must be clean, dry and free from oil. It is applied on primered surface. |
| Application 2 |
Epoxy Paint and hardener components should be mixed well observe to mixing ratio. 5 - 10 minutes waited after components mixing, Merbolin Epoxy Topcoat Paint is applied on surface with brush, roller, air atomized or airless spray gun as one or two coats. |
| Storage Conditions |
It should be storaged in original and closed containers at 5 - 35 °C temperatures for one year. It should be protected from extreme heat and moisture. |
| Important Notices |
Two components must be mixed well.
The mixture should be prepared enough as small parts. The mixing ratio should be considered for paint wastage.
The ambient temperature should be between 5 - 35 °C at the time of application.
Application tools must be cleaned with Merbolin Epoxy Thinner, after the application,.
Paint doesn't empty into drains.
Application procedures defined above should be strictly observed.
|
