| Mode of Packing |
I. Component : 17 kg / II. Component(Hardener): 3 kg |
| Definition |
It is a epoxy resin based undercoat paint, which has two components. |
| Color |
White, Grey |
| Uses of... |
It can be safely used on metal surface for decorative and protection purposeful. |
| Specifications |
It protects the primer paint against external factors, also preparing suitable surface for the topcoat paint. The colour of the epoxy undercoat paints should be chosen suitable with topcoat epoxy paint colours |
| Technical Features |
Type of Resin: Epoxy Resin / Polyamide Hardener
Specific Gravity (g/ml) (20 °C) : 1.45 ± 0.05
Glossy: Semi matt, Matt
Solid Content (by weight) (%) : 70 ± 2
Solid Content (by volume) (%) : 52 ± 2
Flash Point (°C) : 22
Heat Resistance (Dry) (°C): 140
Theoretical Coverage: 14.5 m²/lt; 10 m²/kg (35 µ dry film thickness)
Practical Coverage: 5 - 10 m²/kg (25 - 50 µ dry film thickness)
Mixing Ratio(by weight):I.Component:85/II.Component(Hardener):15
Pot Life (20 °C) : 8 - 12 hours
Recommended wet film thickness: 70 - 115 µ
Dry film thickness (one coat application): 30 - 50 µ
Drying Time (20 °C- Relative Humidity 85%): First drying: 30 min. Drying: 1 - 2 hours, Second coat application: 14 - 16 hours, Full hardening: 7 days
Thin Down Ratio:Depending on application method; it should be thinned with Merbolin Epoxy Thinner 5 - 10% by weight.
|
| Application 1 |
It is applied on primered surface. All application surface must be clean, dry and free from oil. |
| Application 2 |
Epoxy Primer Paint and hardener components should be mixed well observe to mixing ratio. 5 - 10 minutes waited after components mixing, Merbolin Epoxy Undercoat Paint is applied on surface with brush, roller, air atomized or airless spray gun as one or two coats, allowing 16 hours between the coats. |
| Storage Conditions |
It should be storaged in original and closed containers at 5 - 35 °C temperatures for one year. It should be protected from extreme heat and moisture. |
| Important Notices |
Two components must be mixed well.The mixture should be prepared enough as small parts. The mixing ratio should be considered for paint wastage.The ambient temperature should be between 5 - 35 °C at the time of application Application tools must be cleaned with Merbolin Epoxy Thinner, after the application,.Paint doesnt empty into drains.Application procedures defined above should be strictly observed
|
