| Mode of Packing |
25 kg. |
| Definition |
It is an acrylic copolymer emulsion resin modified, water based exterior putty. |
| Color |
White |
| Uses of... |
It can be safely used to take smooth surface on exterior wall of concrete, plaster, mineral substrate etc.. filling of cracks and holes |
| Specifications |
It is water based, odourless, ready to use and can be applied easily. It forms sound surface and saves paint consumption. It has high vapour permeability and resists water and moisture. |
| Technical Features |
Type of Resin : Acrylic copolymer
Viscosity (KU)(25 °C) : >142
Specific Gravity (g/ml) (20 °C) : 1.80 ± 0.05
Solid Content (by weight) (%) : 77 ± 2
pH : 8.00 - 9.00
Practical Coverage : 0.6 - 1.0 m²/kg (depending on the conditions of the surface )
Recommended number of coats: 1 - 2 coats (depending on the conditions of the surface)
Drying Time (20 °C) : Drying : 3 - 5 hours, To sandpaper : 8 - 10 hours
Thin Down Ratio : Ready to use don't thin
|
| Application 1 |
All application surfaces must be sound, dry and clean Old painted, blistered and dirty surface must be cleaned by scratching. Merboizolan Insulation Primer should be applied on absorbent and dusty surface. |
| Application 2 |
After the preparation of surface, Merbolin Exterior Putty is applied as 1 or 2 coats on the surface with spatula or any putty application tools,by waiting 3 - 5 hours between the coats. |
| Storage Conditions |
It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat, moisture and frost. |
| Important Notices |
Putty must be mixed before the use.
The ambient temperature should be between 5 - 35 °C at the time of application
Application tools must be cleaned with water, after the application,.
After the application, the puttied surface must be protected during
24 hours, from chemical and physical factors.
Putty doesn't empty into drains.
Application procedures defined above should be strictly observed. |
|
