| Mode of Packing |
25 kg. |
| Definition |
It is an acrylic copolymer binder based paint material that is applied on interior surfaces by spraying method and gives a decorative appearance to ceilings and walls. |
| Color |
White |
| Uses of... |
It can be safely used for decorative and protective purposes on all kinds of plaster, ytong, gypsum plastered or putty surfaces, prefabricated constructions, interior walls and ceilings with panel boards such as wood, chipboard plaster. |
| Specifications |
It is decorative with its patterns of various sizes and frequencies and different application methods. It minimizes plaster errors on the applied surfaces. It does not swell and spill, and is extremely resistant to water, moisture and impacts. It can be applied quickly and easily with its special equipment, saving labor and time. Since it is water-based, it does not harm human health and the environment, does not contain mold, bacteria and microbes. |
| Technical Features |
Type of Resin : Acrylic copolymer
Viscosity (cps)(23 °C) : 250.000-350.000 ( Brookfield S:7/V:2.5 )
Specific Gravity (g/ml) (20 °C) : 1.80 ± 0.2
Solid Content (by weight) (%) : 70 - 85
Glossy ( 85° - Gloss ) : Matt
pH : 8.00 - 9.00
Theoretical Coverage : 1 - 1.5 kg/m²
Practical Coverage : 0,700 - 0,900 kg/m²
Recommended number of coats : One coat
Drying Time (20 °C) : Drying : 2 hours , Full drying : 36 hours
Thin Down Ratio : 1-2 kg of water (for 1 bucket of Merbolin Granite)
|
| Application 1 |
All application surfaces must be sound, dry and clean Old painted, blistered and dirty surface must be cleaned by scratching and puttied with Merbolin Interior Putty to take sound and smooth surface. In order to prevent sudden water loss of Merbolin Grenit to be applied to the wall and to ensure better adhesion to the surface; 1 unit of Merbolin Merboizolan Insulation Primer is thinned with 5 units of water and applied as a single layer on the surface and saturation of the surface is ensured. Surfaces where Merbolin Granite will not be applied should be masked before application. |
| Application 2 |
2 – 4 hours after the primer application; A bucket of Merbolin Grenite is diluted with 1–2 kg of water. Mixing is done with a special mixer. The air quantity of the compressor is 300 lt/min. air pressure 4 - 6 atu. should be between Spraying is done with a special gun according to the desired pattern. On Merbolin Granite; Merbolin interior paints are applied on the walls and Merbolin ceiling paints are applied on the ceilings. |
| Storage Conditions |
It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat, moisture and frost. |
| Important Notices |
Paint must be mixed before the use.
The ambient temperature should be between 5 - 35 ° C at the time of application.
Application tools must be cleaned with water, after the application.
After the application, the painted surface must be protected during
36 hours, from chemical and physical factors.
Paint doesn't empty into drains.
Application procedures defined above should be strictly observed.
|
