| Mode of Packing |
2.5 kg and 18kg |
| Definition |
It is an alkyd based, anticorrosive synthetic metal primer. |
| Color |
White, grey and red. |
| Uses of... |
It can be used as a primer, on iron and steel construction surfaces. It protects metal surfaces against rust. |
| Specifications |
It protects metal surfaces against rust. Due to it resists to all air condition, it can be used on surface of ship which is not contact with water. It forms strong surface for topcoat paints. |
| Technical Features |
Type of Resin : Alkyd resin
Viscosity (KU)(25°C) : 98 ± 2
Specific Gravity (g/ml) (20 °C) : 1.65 ± 0.05
Solid Content (by weight) (%) : 83 ± 2
Glossy (60° - Gloss) : Matt
Flash Point ( °C ) : 38
Theoretical Coverage : 15 m²/lt (30 µ dry film thickness)
Practical Coverage : 0,070 - 0,085 lt/m² (one coat), 0,120 - 0,140 kg/m² (one coat)
Recommended number of coats : Two coats.
Drying Time (20 °C) : ust free : 3 - 5 hours, Dry through : 10 -12 hours.
Thin Down Ratio : 10 - 15% (with Merbolin Synthetic Thinner.)
|
| Application 1 |
All application surface must be sound, clean and dry, Old and blistered paint coats should be cleaned and surface is sandpapered. |
| Application 2 |
Merbolin Greenhouse Antirust is thinned with 5 - 10% Merbolin Synthetic Thinner. Merbolin Antirust should be applied with brush, roller or paint gun as one or two coats, allowing 2 - 3 hours between the coats. |
| Storage Conditions |
It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat and moisture. |
| Important Notices |
The antirust must be mixed before the use.
The ambient temperature should be between 5 - 35 °C at the time of application
Application tools must be cleaned with Merbolin Synthetic Thinner, after the application,.
After the application, the coated surface must be protected during
12 hours, from chemical and physical factors.
The antirust doesn't empty into drains.
Application procedures defined above should be strictly observed.
|
