Merbolin Heat Resistance Aluminium Paint (600 °C)

Mode of Packing 16 kg
Definition It is a silicone resin based heat resistance paint, which includes aluminium pigment.
Color Metallic Grey
Uses of... It can be safely used on all kind of metal surface such as stove, chimney or exhaust pipe etc.. for high heat resistance purposeful..
Specifications It adheres well to surface, resists to heat until 600 °C. It is topcoat paint which gives aluminium colour.
Technical Features

Type of Resin : Silicone resin
Viscosity (KU)(25 °C) : 60 - 65
Specific Gravity (g/ml) (20°C) : 1.05 ± 0.03
Glossy : Metallic appearance
Solid Content (by weight) (%) : 45 ± 2
Solid Content (by volume) (%) : 35 ± 2
Flash Point ( °C ) : >21
Heat Resistance (Dry) ( °C ) : 600
Theoretical Coverage : 14 m²/lt (20µ dry film thickness)
Practical Coverage : 0.085 - 0.100 lt/m² (one coat aplication),              0.085 - 0.100 kg/m² (one coat aplication)                                        Recommended number of coats : Two coats.
Drying Time (20 °C) : Touch drying : 1 hour,                                          Drying : 6 - 8 hours, Second coat application : 12 hours,                    Full Hardening : 24 hours later to working temperature.
Thin Down Ratio : It should be thinned with Merbolin Heat Resistance Paint Thinner 5 - 10% by weight.

Application 1 The surface should be cleaned by sand blasting Sa 2½. All application surface must be clean, dry and free from rust and old paint layers.
Application 2 Merbolin Heat Resistance Aluminium Paint should be applied 10 to 15 µ dry film thickness all coats with brush or airless spray gun, allowing 12 hours between the coats. The paint film should be fully cured before taking the system into service. Temperature should be increased slowly.
Storage Conditions It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat and moisture.
Important Notices

Paint must be mixed well before the use. The ambient temperature should be between 5 - 35 °C at the time of application.
Application tools must be cleaned with Merbolin Heat Resistance Paint Thinner, after the application.
After the application, the painted surface must be protected during 24 hours, from chemical and physical factors.
The paint doesn’t empty into drains.
Application procedures defined above should be strictly observed.


DANGER WARNINGS

H226 Flammable liquid and vapour.
H260 In contact with water releases flammable gases which may ignite spontaneously.  
H312+H332 Harmful in contact with skin or if inhaled.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause dizziness or lightheadedness.
H412 Long-lasting harmful effect in aquatic environments. 
EMERGENCY WARNINGS

P101 Keep the package and the label if you need medical advice.
P102  Keep out of reach of children
P103  Read the label before using. 
P223 Do not alow contact with water, due to the possibility of violent reaction and ignition.
P210 Keep away from heat/sparks/flames/hot surfaces. – Smoking is forbidden.
P303+P361+P353 IN CASE OF SKIN (or hair) CONTACT: Instantly remove/take off all contaminated clothing. Rinse your skin with water/shower.
P305+P351+P338 IN CASE OF EYE CONTACT: Carefully rinse with water for several minutes. Remove them if you are wearing contact lenses and they are easy to remove. Continue rinsing.
P405 Keep under lock and key.
P501 Dispose of the content/container in accordance with local/regional/national/international legislations.