| Mode of Packing |
16 kg |
| Definition |
It is a silicone resin based heat resistance paint, which includes aluminium pigment. |
| Color |
Metallic Grey |
| Uses of... |
It can be safely used on all kind of metal surface such as stove, chimney or exhaust pipe etc.. for high heat resistance purposeful.. |
| Specifications |
It adheres well to surface, resists to heat until 350 - 400 °C. It is topcoat paint which gives aluminium colour. |
| Technical Features |
Type of Resin : Silicone resin
Viskozite (KU)(25 °C) : 60 - 65
Specific Gravity (g/ml) (20 °C) : 1.08 ± 0.03
Glossy : Metallic appearance
Solid Content (by weight) (%) : 46 ± 2
Solid Content (by volume) (%) : 35 ± 2
Flash Point (°C) : >21
Heat Resistance (Dry) ( °C ) : 350 - 400
Theoretical Coverage : 16 m²/lt (20µ dry film thickness)
Practical Coverage : 0.075 - 0.085 lt/m² (one coat aplication), 0.080 - 0.095 kg/m² (one coat aplication) Recommended number of coats : Two coats.
Drying Time (20 °C) : Touch drying : 1 hour, Drying : 6 - 8 hours, Second coat application : 12 hours, Full Hardening : 24 hours later to working temperature.
Thin Down Ratio : It should be thinned with Merbolin Heat Resistance Paint Thinner 5 - 10% by weight.
|
| Application 1 |
The surface should be cleaned by sand blasting Sa 2½. All application surface must be clean, dry and free from rust and old paint layers. |
| Application 2 |
Merbolin Heat Resistance Aluminium Paint should be applied 20 µ dry film thickness all coats with brush or airless spray gun, allowing 12 hours between the coats. The paint film should be fully cured before taking the system into service. Temperature should be increased slowly. |
| Storage Conditions |
It should be storaged in original and closed containers at 5 - 35 ° C temperatures. It should be protected from extreme heat and moisture. |
| Important Notices |
Paint must be mixed well before the use. The ambient temperature should be between 5 - 35 °C at the time of application.
Application tools must be cleaned with Merbolin Heat Resistance Paint Thinner, after the application.
After the application, the painted surface must be protected during 24 hours, from chemical and physical factors.
The paint doesn’t empty into drains.
Application procedures defined above should be strictly observed
|
