Merbolin Parquet Varnish - Glossy

Mode of Packing 0.750 lt, 2.5 lt and 12 kg.
Definition It is an urethane alkyd resin based, one component, glossy parquet varnish.
Color Colourless, transparent.
Uses of... Safely protects surfaces such as parquet, tile and mosaic against substances such as detergents, alcohol, oil, tea and soft drinks.
Specifications It is an easily applied, scratch and abrasion resistant, elastic, glossy parquet varnish.
Technical Features

Type of Resin : Urethane alkyd resin
Viscosity (KU)(25 °C) : 70 ± 5
Specific Gravity (g/ml) (20 °C) : 0.90 ± 0.03
Solid Content (by weight) (%) : 50 ± 2
Colour (Gardner) : Max. 10
Glossy (60° - Gloss) : Min. 85
Flash Point ( °C ) : 38
Theoretical Coverage : 18 m²/lt (30 µ dry film thickness)
Practical Coverage : 0,075 - 0,100 lt/m² (one coat),                          0,070 - 0,090 kg/m² (one coat)
Recommended number of coats : Two or Three coats.
Drying Time (20 °C) : Touch dry : 1 - 2 hours,                                        Dust Free : 2 - 3 hours, Dry through : 24 hours.
Thin Down Ratio : It is thinned with 10 - 15% Merbolin Synthetic Thinner at first coat application.

Application 1 The application surface must be sound, dry and clean. Old and blistered varnish coats on surface of parquet should be cleaned by scratching and emerized. The polished surface of floor tile or mosaic must be clean free from wax coat. The parquet faults and spaces should be filled with Merbolin Super Putty or sawdust-varnish mixture, allowing 24 - 48 hours drying after than the roughs must be emerized.
Application 2 Merbolin Parquet Varnish is produced ready to use and is thinned with 10 - 15% Merbolin Synthetic Thinner at first coat application for well penetration to surface. It should be applied with brush or roller as two or three coats, allowing 5 - 6 hours between the coats.
Storage Conditions It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat and moisture.
Important Notices

The varnish must be mixed before the use.
The ambient temperature should be between 5 - 35 °C at the time of application
Application tools must be cleaned with Merbolin Synthetic Thinner, after the application,.
After the application, the varnished surface must be protected during 3 days, from chemical and physical factors.
The varnish doesn't empty into drains.
Application procedures defined above should be strictly observed.


DANGER WARNINGS

H226 Flammable liquid and vapour.
H336 May cause dizziness or lightheadedness.
H411 Long-lasting toxic effect in aquatic environments. 
EMERGENCY WARNINGS

P101 Keep the package and the label if you need medical advice.
P102  Keep out of reach of children
P103  Read the label before using. 
P210 Keep away from heat/sparks/flames/hot surfaces. – Smoking is forbidden.
P241 Use explosion proof electrical/ventilating/ignition materials.
P261 Avoid breathing dust, vapor, mist, gas, smoke, spray.
P303+P361+P353 IN CASE OF SKIN (or hair) CONTACT: Instantly remove/take off all contaminated clothing. Rinse your skin with water/shower.
P405 Keep under lock and key.
P501 Dispose of the content/container in accordance with local/regional/national/international legislations.