| Mode of Packing |
(I. Comp.:12 kg / II.Comp.:6 kg) - (I.Comp.:2 kg / II.Comp.:1 kg) |
| Definition |
It is a solventfree epoxy resin based, transparent varnish which has two components. |
| Color |
Transparent |
| Uses of... |
It is used for the protection and repair of glass fiber reinforced polyester, wood and other constructions. It provides adhesion and protection by covering wooden tables and ornaments with thick filling. |
| Specifications |
It is a two component, chemical resistant varnish with strong adhesion on wood, metal or other constructions. It penetrates the wood perfectly, strengthens the wood bonds and provides flexibility. |
| Technical Features |
Type of Resin : Epoxy Resin / Polyamine Hardener
Specific Gravity (g/ml) (20 °C) : 0.95 ± 0.05
Glossy : Gloss
Solid Content (by weight) (%) : 97 ± 1
Solid Content (by volume) (%) : 96 ± 1
Flash Point ( °C ) : Nonflammable
Heat Resistance (Dry) (°C) : 140
Flexibility: Good
Water Resistance: Good
Solvent Resistance: Good
Mixing Ratio (by weight) : I. Comp.: 67 / II. Comp.(Hardener): 33 (2 Units / 1 Units)
Pot Life (20 °C) : 1 hour.
Drying Time (20 °C- Relative Humidity 85%):First drying:2-3 hours, Drying : 8 - 10 hours, Second coat application : 24 hours, Full hardening : 7 days
Thin Down Ratio : Thinner addition is not recommended.
|
| Application 1 |
Application surfaces must be clean and dry. |
| Application 2 |
I and II. Components are mixed with each other by paying attention to the mixing ratio, and rested for 5-10 minutes; It is applied in one or two coats with a brush, roller or paint gun, waiting for 24 hours between coats. |
| Storage Conditions |
It should be storaged in original and closed containers at 5 - 35 °C temperatures for two years. It should be protected from extreme heat and moisture. |
| Important Notices |
Two components must be mixed well.
The mixture should be prepared enough as small parts. The mixing ratio should be considered for varnish wastage.
The ambient temperature should be between 5 - 35 °C at the time of application
Application tools must be cleaned with Merbolin Epoxy Thinner, after the application,.
Paint doesn't empty into drains.
Application procedures defined above should be strictly observed.
|
DANGER WARNINGS
| H315 |
Causes skin irritation. |
| H319 |
Causes serious eye irritation. |
| H317 |
Causes allergic skin reactions. |
| H302+H312 |
Harmful in contact with skin or if swallowed. |
| H411 |
Long-lasting toxic effect in aquatic environments. |
| H314 |
Causes serious skin burns and eye damage. |
| H361fd |
Suspected of damaging fertility.Suspecting of causing harm to the unborn child. |
|
EMERGENCY WARNINGS
| P101 |
Keep the package and the label if you need medical advice. |
| P102 |
Keep out of reach of children |
| P103 |
Read the label before using. |
| P260 |
Do not breathe dust, vapor, mist, gas, smoke, spray. |
| P261 |
Avoid breathing dust, vapor, mist, gas, smoke, spray. |
| P280 |
Use protective gloves/protective clothing/glasses/mask. |
| P303+P361+P353 |
IN CASE OF SKIN (or hair) CONTACT: Instantly remove/take off all contaminated clothing. Rinse your skin with water/shower. |
| P305+P351+P338 |
IN CASE OF EYE CONTACT: Carefully rinse with water for several minutes. Remove them if you are wearing contact lenses and they are easy to remove. Continue rinsing. |
| P310 |
Call the NATIONAL POISON CENTER IMMEDIATELY ON 114 or doctor/physician. |
| P405 |
Keep under lock and key. |
| P321 |
Special medical response required (see label) |
| P362 |
Remove contaminated clothing and wash before reuse. |
| P501 |
Dispose of the content/container in accordance with local/regional/national/international legislations. |
|
