| Mode of Packing |
2.5 lt, 7.5 lt and 20 kg. |
| Definition |
It is an acrylic copolymer resin based, silicone modified matt, interior paint. |
| Color |
According to colour card. |
| Uses of... |
It can be safely used on interior surface of gypsum, plaster, concrete for decorative and protection purposeful. |
| Specifications |
It is water based, matt, interior paint which has high opacity, water permeability, odourless and environment friendly. |
| Technical Features |
Type of Resin : Acrylic copolymer
Viscosity (KU)(25°C) : 134 ± 3
Specific Gravity (g/ml) (20°C) : 1.46 ± 0,03
Solid Content (by weight) (%) : 59 ± 2
Glossy ( 85° - Gloss ) : 7 ± 3
pH : 8.00 - 9.00
Theoretical Coverage : 13 m² /lt ; 9 m²/kg (30 µ dry film thickness)
Practical Coverage : 0,075 - 0,090 lt/m² ( one coat )
0,110 - 0,130 kg/m² ( one coat )
Recommended number of coats : Two coats.
Drying Time (20 °C) : Drying : 2 - 3 hours
Full drying: 24 hours
Thin Down Ratio : 25 - 30 % (with water - by volume)
|
| Application 1 |
All application surfaces must be sound, dry and clean old painted, blistered and dirty surface must be cleaned by scratching and puttied with Merbolin Interior Putty to take sound and smooth surface. After putty application, the surface should be primered with Merboizolan Insulation Primer as one coat. Ambient temperature must be between 5 °C and 35 °C during application. |
| Application 2 |
2 - 3 hours after primer application, Merbolin Silicone Modified Matt Interior Paint, which is applied with brush or roller, is thinned with 25 - 30% water. It should be applied as two coats, allowing 2-3 hours between the coats. |
| Storage Conditions |
It should be storaged in original and closed containers at 5 - 35 °C. It should be protected from extreme heat, moisture and frost. |
| Important Notices |
Paint must be mixed before the use.
The ambient temperature should be between 5 - 35 °C at the time of application
Application tools must be cleaned with water, after the application.
After the application, the painted surface must be protected during
3 days, from chemical and physical factors.
Paint doesn't empty into drains.
Application procedures defined above should be strictly observed.
|
