| Mode of Packing |
3 kg, 10 kg and 20 kg. |
| Definition |
It is an acrylic copolymer emulsion based, silicone added, water based, white primer. |
| Color |
White |
| Uses of... |
All kinds of plaster, exposed concrete, ytong, brick etc. It can be used safely as a primer on surfaces. |
| Specifications |
It is resistant to external factors, has high covering power; It reduces the consumption of topcoat paint. Since it contains silicone, it allows the surface to breathe and impermeability. It acts as a bridge between the topcoat and the surface. |
| Technical Features |
Type of Resin : Acrylic copolymer - Silicone resin
Viscosity (KU)(25 °C) : 126 ± 3
Specific Gravity (g/ml) (20 °C) : 1.74 ± 0.03
Solid Content (by weight) (%) : 71 ± 2
pH : 8.00 - 9.00
Theoretical Coverage : 16 m²/lt , 9 m²/kg. (30µ dry film thickness)
Practical Coverage : 0.070 - 0.080 lt/m² ( one coat ) 0.120 - 0.140 kg/m² ( one coat )
Recommended number of coats : One coat.
Drying Time (20 °C) : Drying : 4 - 6 hours, Full drying : 8 - 10 hours
Thin Down Ratio : 15 - 20% (with water)
|
| Application 1 |
Application surfaces must be sound, dry and clean. Dirty, dusty, swollen or old paint surfaces must be scraped off. |
| Application 2 |
Merbolin Silicone Interior / Exterior Primer is thinned with 15 - 20% water and applied to the surface in one coat with a brush or roller. |
| Storage Conditions |
It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat, moisture and frost. |
| Important Notices |
Primer must be mixed before the use.
The ambient temperature should be between 5 - 35 °C at the time of application
Application tools must be cleaned with water, after the application.
After the application, the primered surface must be protected during 24 hours, from chemical and physical factors.
Primer doesn’t empty into drains.
Application procedures defined above should be strictly observed.
|
