| Mode of Packing |
2.5 lt, 7.5 lt and 15 lt. |
| Definition |
It is an acrylic copolymer resin based, silk matt interior paint, which is silicone modified. |
| Color |
According to colour card. |
| Uses of... |
It can be safely used on interior surface of gypsum, plaster, concrete for decorative and protection purposeful. |
| Specifications |
It is a silicone modified, water based, silk matt interior paint, which has high opacity, wipeable. It is resistant to mildew. It is an environmentally friendly, odorless, decorative, silk matt topcoat interior paint. |
| Technical Features |
Type of Resin : Acrylic copolymer
Viscosity (KU)(25 °C) : 115 - 120
Specific Gravity (g/ml) (20 °C) : 1.34 ± 0.03
Solid Content (by weight) (%) :57 ± 2
Glossy ( 85° - Gloss ) : 45 ± 3
pH : 8.00 - 9.00
Theoretical Coverage : 15 m²/lt ; 11 m²/kg (30 µ dry film thickness)
Practical Coverage :0.075 - 0.095 lt /m² ( one coat ) 0,100 - 0,125 kg/m² ( one coat )
Recommended number of coats : Two coats
Drying Time (20 °C) : Dust Free : 1 hour, Second Coat Application : 4 - 5 hours, Full drying : 24 hours
Thin Down Ratio : 10 % ( with water )
|
| Application 1 |
All application surfaces to be painted must be ensured to be sound, dry and clean. Swollen or old paints must be scraped off. To make the surfaces smooth, you are recommended to apply the Merbolin Acrylic Interior Puty or Satin Gypsum before. After applying said puty or gypsum, sandpaper the surfaces if necessary, and apply the Merbolin Merboizolan insulation primer coat. |
| Application 2 |
2 - 3 hours after applying said primer coat, then thin the Merbolin Silicone Silk matt Interior Paint whit water by 10% (volume), and apply with a brush or roller in two coats. Let the first coat rest for 4 - 5 hours before applying the second coat. Ambient temperature must be between 5 °C and 35 °C during application. |
| Storage Conditions |
It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat, moisture and frost. |
| Important Notices |
Paint must be mixed before the use.
The ambient temperature should be between 5 - 35 °C at the time of application.
Application tools must be cleaned with water, after the application.
After the application, the painted surface must be protected during
3 days, from chemical and physical factors.
Paint doesn't empty into drains.
Application procedures defined above should be strictly observed.
|
