| Mode of Packing |
3.5 kg, 10 kg and 17.5 kg. |
| Definition |
It is a water based, acrylic copolymer bound and matt for interior ceiling paint. |
| Color |
White |
| Uses of... |
It can be safely used on interior surface of gypsum, plaster or concrete. |
| Specifications |
It is water based, odorless, breathable and matt white for interior ceiling paint, It provides superior coverage and is applicable on all kinds of surfaces of plaster, gypsum, etc. |
| Technical Features |
Type of Resin : Acrylic copolymer
Viscosity (KU)(25 °C) : 134 ± 3
Specific Gravity (g/ml) (20 °C) : 1.77 ± 0.03
Solid Content (by weight) (%) : 70 ± 2
Glossy ( 85° - Gloss ) : 7 ± 3
pH : 8.00 – 9.00
Theoretical Coverage : 15 m² /lt ; 9 m²/kg (30 µ dry film thickness)
Practical Coverage : 0,065 – 0,085 lt/m² ( one coat ) 0,100 - 0,140 kg/m² ( one coat )
Recommended number of coats : Two coats
Drying Time (20 °C) : Drying : 2 - 3 hours, Full drying : 24 hours
Thin Down Ratio : 20% ( with water )
|
| Application 1 |
All application surfaces must be sound, dry and clean Old painted, blistered and dirty surface must be cleaned by scratching and puttied with Merbolin Interior Putty to take sound and smooth surface. After putty application, the surface should be primered with Merboizolan Insulation Primer as one coat. |
| Application 2 |
2 – 3 hours after primer application, Merbolin Super Ceiling Paint, which is applied with brush or roller, is thinned with 20% water. It should be applied as two coats, allowing 1 – 3 hours between the coats. |
| Storage Conditions |
It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat, moisture and frost. |
| Important Notices |
Paint must be mixed before the use.
The ambient temperature should be between 5 – 35 °C at the time of application
Application tools must be cleaned with water, after the application,.
After the application, the painted surface must be protected during
3 days, from chemical and physical factors.
Paint doesn’t empty into drains.
Application procedures defined above should be strictly observed.
|
