Mode of Packing |
0.750 lt, 2.5 lt and 15 lt. |
Definition |
It is an alkyd resin based, matt, synthetic topcoat paint. |
Color |
According to colour card. |
Uses of... |
It can be safely used on interior or exterior of wooden, metal and plastered surface for decorative and protection purposeful. |
Specifications |
It is fast dry, fadeless and provides smooth surface and matt, synthetic decorative topcoat paint, which has high opacity |
Technical Features |
Type of Resin : Alkyd resin
Viscosity (KU)(25 °C) : 105 ± 5
Specific Gravity (g/ml) (20 °C) : 1.50 ± 0.05
Solid Content (by weight) (%) : 79 ± 2
Glossy (60° - Gloss) : ≤ 10 ( Matt )
Flash Point ( °C ) : 38
Theoretical Coverage : 20 m²/lt ( 30 µ dry film thickness)
Practical Coverage : 0,070 - 0,090 lt/m² (one coat), 0,100 - 0,140 kg/m² (one coat)
Recommended number of coats : Two coats.
Drying Time (20 °C) : Dust free : 1 - 2 hours, Second coat application : 6 - 8 hours, Dry through : 10 - 12 hours.
Thin Down Ratio : 10 - 20% (with Merbolin Synthetic Thinner.)
|
Application 1 |
All application surface must be sound, clean and dry, a) Wooden Surfaces : All knots are burned, old and blistered paint must be clean and the surface is saturated with Merbolin Merbotex. The surface hollow and crack is filled with Merbolin Synthetic Super Putty and emerized. After that surface is cleaned and primered with Merbolin Synthetic Primer. b) Metal Surfaces : After the surface cleaning free from dirt and oil, the surface primered with Merbolin Antirust. c) Concrete Surfaces : Old and blistered paint coats cleaned by scratching and surface defaults should be repaired with Merbolin Synthetic Super Putty and emerized. After that surface is cleaned and primered with Merbolin Synthetic Primer. |
Application 2 |
Merbolin Matt Decoration Paint is thinned with 10 - 20% Merbolin Synthetic Thinner, after that it should be applied with brush, roller or paint gun, as two coat, allowing 6 - 8 hours between the coats. |
Storage Conditions |
It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat and moisture. |
Important Notices |
Paint must be mixed before the use.
The ambient temperature should be between 5 - 35 °C at the time of application
Application tools must be cleaned with Merbolin Synthetic Thinner, after the application,.
After the application, the painted surface must be protected during
3 days, from chemical and physical factors.
Paint doesn't empty into drains.
Application procedures defined above should be strictly observed.
|