| Mode of Packing |
25 kg. |
| Definition |
It is chlorinated rubber modified alkyd based, cold road paint. |
| Color |
White and yellow. |
| Uses of... |
It can be safely used for marking purposes on road surfaces coated with asphalt, on stops, car parks and crosswalk. |
| Specifications |
It has high elasticity and excellent abrasion resistance. Due to its mechanical resistance is high, it forms a long-lasting film on surfaces. Because of including specific additives, it provides order and security for roads by reflecting light. |
| Technical Features |
Type of Resin : Chlorinated rubber / Alkyd resin
Viscosity (KU)(25 °C) : 80 - 90
Specific Gravity (g/ml) (20 °C) : 1.60 ± 0.05
Solid Content (by weight) (%) : 80 ± 2
Glossy ( 60° - Gloss) : Matt
Flash Point ( °C ) : <21
Practical Coverage : 0.6 lt/m² , 1 kg/m² (400 µ dry film thickness )
Recommended number of coats : One coat.
Drying Time (20 °C) : Touch dry : 15 min. , Dry through : 1 hour
Thin Down Ratio : It is thinned with 5 - 10% Merbolin Traffic Road Marking Paint Thinner.
|
| Application 1 |
Application surface must be sound, dry and clean. |
| Application 2 |
Depending on application method and weather heat, Merbolin Traffıc Road Paint is thinned with %5-10 Merbolin Traffıc Road Paint Thinner and then it is applied as one coat by using brush, roller or special line machines. |
| Storage Conditions |
It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat and moisture. |
| Important Notices |
The paint must be mixed before the use.
The ambient temperature should be between 10 - 40 °C at the time of application
Application tools must be cleaned with Merbolin Traffıc Road Paint Thinner, after the application,.
After the application, the painted surface must be protected during 1 hour, from chemical and physical factors.
The paint doesn’t empty into drains.
Application procedures defined above should be strictly observed.
|
