Merbomarin Yatch Varnish

Mode of Packing 0.750 lt, 2.5 lt and 12 kg
Definition It is an urethane alkyd resin based, one component, glossy varnish.
Color Colourless, transparent.
Uses of... It can be used reliable on wooden surface like interior or exterior of building, furniture and sea vehicles.
Specifications It has lasting gloss properties and high filling capacity. It protects the surfaces against sunlight, sea and exterior effects. It is fadeless and elastic wood varnish.
Technical Features

Type of Resin : Urethane alkyd resin
Viscosity (KU)(25 °C) : 70 ± 5
Specific Gravity (g/ml) (20 °C) : 0.90 ± 0.03
Solid Content (by weight) (%) : 50 ± 1
Glossy (60° - Gloss) : Min 85
Flash Point ( °C ) : 38
Theoretical Coverage : 18 m ² / lt (30 µ dry film thickness )
Practical Coverage : 0,070 - 0,090 lt/m² (one coat),                            0,060 0,080 kg/m² ( one coat )
Recommended number of coats : Two coats.
Drying Time (20 °C) : Touch dry : 15 - 30 min.                                      Dust free : 1.5 - 2 hours, Dry through : 24 hours.
Thin Down Ratio : Application with brush or roller : It doesn't thin Spray application : It is thinned with 10% Merbolin Synthetic Thinner.

Application 1 The application surface must be sound, dry and clean. Old and blistered varnish coats should be cleaned by scratching and sandpapered. All knots on new wooden surface are burned and cleaned with Merbolin Cellulosic Thinner. The surface is saturated with Merbolin Merbotex.
Application 2 Merbomarin Yacht Varnish should be applied as two or three coats, allowing a day between the coats. It is thinned with 10% Merbolin Synthetic Thinner for spraying equipment application and doesn't thin for brush or roller application.
Storage Conditions It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat and moisture.
Important Notices
The varnish must be mixed before the use.
The ambient temperature should be between 5 - 35 °C at the time of application
Application tools must be cleaned with Merbolin Synthetic Thinner, after the application,.
After the application, the varnished surface must be protected during 3 days, from chemical and physical factors.
The varnish doesn't empty into drains.
Application procedures defined above should be strictly observed.

DANGER WARNINGS

H226 Flammable liquid and vapour.
H336 May cause dizziness or lightheadedness.
H411 Long-lasting toxic effect in aquatic environments. 
EMERGENCY WARNINGS

P101 Keep the package and the label if you need medical advice.
P102  Keep out of reach of children
P103  Read the label before using. 
P210 Keep away from heat/sparks/flames/hot surfaces. – Smoking is forbidden.
P241 Use explosion proof electrical/ventilating/ignition materials.
P261 Avoid breathing dust, vapor, mist, gas, smoke, spray.
P303+P361+P353 IN CASE OF SKIN (or hair) CONTACT: Instantly remove/take off all contaminated clothing. Rinse your skin with water/shower.
P405 Keep under lock and key.
P501 Dispose of the content/container in accordance with local/regional/national/international legislations.