| Mode of Packing |
0,750 lt, 2,5 lt and 12 kg. |
| Definition |
It is a synthetic alkyd resin based, transparent, decorative wood varnish. |
| Color |
According to colour card. |
| Uses of... |
It can be used reliable on exterior or interior wood surface and garden forniture. |
| Specifications |
It enables the wood to turn into the desired color without changing its natural appearance, and prevents the wood from rotting. It is a wood varnish that does not fade, on which all kinds of furniture varnish can be applied. |
| Technical Features |
Type of Resin : Alkyd resin
Viscosity (sec-DIN 4)(25 °C) : 10 - 15
Specific Gravity (g/ml) (20 °C) : 0.84 ± 0.02
Solid Content (by weight) (%) : 20 ± 2
Flash Point ( °C ) : 38
Practical Coverage : 15 - 25 m²/lt (one coat)
Recommended number of coats : Two coats.
Drying Time (20 °C) : Touch dry: 1 - 3 hours, Dry through: 12 - 15 hours.
Thin Down Ratio : It is used directly, not need thinner.
|
| Application 1 |
All application surfaces must be clean, dry and free from dirt and oil. The surface should be sandpapered if it is necessary. All knots are burned and cleaned with Merbolin Cellulosic Thinner. |
| Application 2 |
It is ready to use and not need thinner. After well mixing, Merbotex Wood Varnish should be applied with brush, roller or spray gun as two coat, allowing 6 - 8 hours between the coats. |
| Storage Conditions |
It should be storaged in original and closed containers at 5 - 35 °C temperatures . It should be protected from extreme heat and moisture. |
| Important Notices |
Merbolin Wood Varnish must be mixed before the use.
The ambient temperature should be between 5 - 35 °C at the time of application
Application tools must be cleaned with Merbolin Synthetic Thinner, after the application,.
After the application, the surface must be protected during 3 days, from chemical and physical factors.
Merbolin Wood Varnish doesn't empty into drains.
Application procedures defined above should be strictly observed. |
|
