Merbolin Avantaj Silicone Modified Interior Paint

Mode of Packing 0.750 lt, 2.5 lt, 7.5 lt and 20 kg.
Definition It is an acrylic copolymer resin based, matt, interior paint
Color According to colour card.
Uses of... It can be safely used on interior surface of gypsum, plaster, concrete for decorative and protection purposeful.
Specifications It is water based, odourless, coloured, matt, decorative, interior wall paint, which has high opacity and vapor permeability.
Technical Features

Type of Resin : Acrylic copolymer
Viscosity (KU)(25 °C) : 134 ± 3
Specific Gravity (g/ml) (20 °C) : 1.62 ± 0.03
Solid Content (by weight) (%) : 69 ± 2
Glossy ( 85° - Gloss ) : 7 ± 3
pH : 8.00 - 9.00
Theoretical Coverage : 15 m² /lt ; 9 m²/kg (30 µ dry film thickness)
Practical Coverage : 0,075 - 0,090 lt/m² ( one coat )                            0,125 - 0,150 kg/m² (one coat)
Recommended number of coats : Two coats
Drying Time (20 °C) : Drying : 2 - 3 hours, Full drying : 24 hours
Thin Down Ratio : 30% ( with water )

Application 1 All application surfaces must be sound, dry and clean Old painted, blistered and dirty surface must be cleaned by scratching and puttied with Merbolin Interior Putty to take sound and smooth surface. After putty application, the surface should be primed with Merboizolan Insulation Primer as one coat.
Application 2 2 - 3 hours after primer application, Merbolin Avantaj Silicone Modified Interior Paint, which is applied with brush or roller, is thinned with 30% water. It should be applied as two coats, allowing 2 - 3 hours between the coats.
Storage Conditions It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat, moisture and frost.
Important Notices

Paint must be mixed before the use.
The ambient temperature should be between 5 - 35 °C at the time of application.
Application tools must be cleaned with water, after the application,.
After the application, the painted surface must be protected during
3 days, from chemical and physical factors.
Paint doesn't empty into drains.
Application procedures defined above should be strictly observed.


DANGER WARNINGS

H317 Causes allergic skin reactions.
EMERGENCY WARNINGS

P101 Keep the package and the label if you need medical advice.
P102  Keep out of reach of children
P103  Read the label before using. 
P261 Avoid breathing dust, vapor, mist, gas, smoke, spray.
P280  Use protective gloves/protective clothing/glasses/mask. 
P321  Special medical response required (see label) 
P363 Wash contaminated clothing before reuse.
P333+P313 In case of irritated/itchy skin: Seek medical help/advice.
P501 Dispose of the content/container in accordance with local/regional/national/international legislations.