| Mode of Packing |
15 kg |
| Definition |
It is a chlorinated rubber resin based, transparent primer. |
| Color |
Colourless |
| Uses of... |
It can be safely used on concrete or plastered surface before topcoat paint application. |
| Specifications |
It is applied on surface before chlorinated topcoat paint application. Due to its high penetration property it ensures good adhesion between surface and topcoat paint. |
| Technical Features |
Type of Resin : Chlorinated rubber resin / Plasticizer
Specific Gravity (g/ml) (20 °C) : 1.00 ± 0.05
Glossy : Semi gloss
Solid Content (by weight) (%) : 25 ± 1
Solid Content (by volume) (%) : 17 ± 1
Flash Point ( °C ) : 22
Heat Resistance (Dry) ( °C ) : 70
Theoretical Coverage : 4.2m²/lt (40µ dry film thickness )
Practical Coverage : 3.3 m²/kg (40µ dry film thickness )
Recommended number of coats : One coat.
Drying Time(20°C- Relative Humidity 65%):Touch drying: 1-2 hours, Drying : 4 - 5 hours.
Thin Down Ratio : It can be used directly but if necessity of dilution it should be thinned with Merboclor Paint Thinner 5% by weight.
|
| Application 1 |
All application surface must be clean, dry and free from old paint layers. |
| Application 2 |
Merboclor Sealer is ready to use.It should be mixed well and applied with brush or roller as one coat. |
| Storage Conditions |
It should be storaged in original and closed containers at 5 - 35 °C temperatures. It should be protected from extreme heat and moisture. |
| Important Notices |
Sealer must be mixed well before the use.
The ambient temperature should be between 5 - 35 °C at the time of application
Application tools must be cleaned with Merboclor Paint Thinner, after the application,.
After the application, the painted surface must be protected during 12 hours, from chemical and physical factors.
Sealer doesn't empty into drains.
Application procedures defined above should be strictly observed
|
