Merbotherm Heat Insulation Ceiling Paint

Mode of Packing 15 lt.
Definition It is an acrylic copolymer resin based, matt, heat insulation ceiling paint containing ceramic additives in its structure.
Color White
Uses of... It can be safely used on interior ceiling surfaces of gypsum, plaster, concrete for decorative, heat insulation and protection purposeful.
Specifications Due to having photocatalytic properties, the paint surface always appears clear and fresh. It is water based, matt ceiling paint which has high opacity, water permeability, anti-condensation properties, cleaned easily, odourless and environment friendly. It has flame retardent properties and good mechanical resistance. It provides energy saving under the every kind of weather conditions at all seasons. It saves up 30 to 35% energy by reducing heating and cooling expenses.
Technical Features

Type of Resin : Acrylic copolymer
Viscosity (KU)(25 °C) : 134 ± 3
Specific Gravity (g/ml) (20°C) : 1.25 ± 0,03
Solid Content (by weight) (%) : 68 ± 2                                                  Solid Content (by volume) (%) : 50 ± 2
Glossy ( 85° - Gloss ) : 7 ± 3
pH : 8.00 - 9.00
Theoretical Coverage : 16 m² /lt ; 13 m²/kg (30 µ dry film thickness)
Practical Coverage : 0,070 - 0,100 lt/m² ( one coat )
0,090 - 0,125 kg/m² ( one coat ) 
Recommended number of coats : Two coats.
Drying Time (20 °C) : Drying : 2 - 3 hours
Full drying: 24 hours 
Thin Down Ratio : 20% (with water - by volume)

Application 1 All application surfaces must be sound, dry and clean old painted, blistered and dirty ceiling surface must be cleaned by scratching and puttied with Merbolin Interior Putty to take sound and smooth surface. After putty application, the surface should be primered with Merboizolan Insulation Primer as one coat. Ambient temperature must be between 5 °C and 35 °C during application.
Application 2 2 - 3 hours after primer application, Merbotherm Heat Insulation Ceiling Paint, which is applied with brush or roller, is thinned with 20% water. It should be applied as two coats, allowing 2-3 hours between the coats.
Storage Conditions It should be storaged in original and closed containers at 5 - 35 °C. It should be protected from extreme heat, moisture and frost.
Important Notices

Paint must be mixed before the use.
The ambient temperature should be between 5 - 35 °C at the time of application
Application tools must be cleaned with water, after the application,.
After the application, the painted surface must be protected during
3 days, from chemical and physical factors.
Paint doesn't empty into drains.
Application procedures defined above should be strictly observed.


DANGER WARNINGS

H317 Causes allergic skin reactions.
EMERGENCY WARNINGS

P101 Keep the package and the label if you need medical advice.
P102  Keep out of reach of children
P103  Read the label before using. 
P261 Avoid breathing dust, vapor, mist, gas, smoke, spray.
P280  Use protective gloves/protective clothing/glasses/mask. 
P321  Special medical response required (see label) 
P363 Wash contaminated clothing before reuse.
P333+P313 In case of irritated/itchy skin: Seek medical help/advice.
P501 Dispose of the content/container in accordance with local/regional/national/international legislations.